Zinc Beams / C Channels: DECO Method of Deliver Early Coating Options and field touch up was used on this project. Beams and C Channels were dropped at DECO, blasted, Zinc coated, and one finish coat.
🔹 Each process was measured and documented with cloud based device for quality control and quality assurance.
🔹 Slip critical ends were protected from blast process and coatings.
🔹 Finished beams and channels were delivered to airport.
🔹 DECO did onsite touch up after installation.
Aluminum Panels: This is a prime example of coating panels that can meet fast track project. Some panel coatings required a full 30 day cure before delivery before installation. Metal preparation is careful and meticulous during the etching wash and hand wipe. DECO is experienced with application and adhesion for a variety of panels, and has a nearly limitless color palate including a variety of vibrant colors to metals.
🔹 Finished panels are racked using clean gloves, covered in breathable protection.
🔹 Panels are packed and shipped with equal care.
🔹 Field touch up is rarely needed after installation.
🔹 Quality control/quality assurance inspections are done on each panel.
🔹 Packing materials selected are researched for coating compatibility.
🔹 No touch up was needed on the airport panels.